中国(上海)自由贸易试验区临港新片区老芦公路536号
021-57525860·13162862074
首页/产品目录/扭矩扳手
12 / 16 · 产品线

扭矩扳手Torque Wrenches

预置式、指针式、数显式扭矩扳手与扭矩检定仪,用于螺栓紧固力矩的设定、施加与校验,是装配质量与安全的关键计量器具。

13款机型
1类型
GBISO · ASTM
48h技术响应
13 款机型
共 13 款机型 · 产品线⚡ 快速选型向导⌕ 产品选型中心¥ 报价申请与选型方案▤ 选型方案↓ 选型方案书
没有匹配的机型,换个关键词或直接联系工程师。

技术资料

六份技术文件,覆盖原理到验收

行业案例

典型检测工况,以及本产品线对应的解决思路。

01
工况汽车装配
检测难点底盘螺栓扭矩
解决方案20~200N·m,±1%,扭矩+角度
结果出具检测报告;按标准核验示值误差与重复性。
02
工况风电
检测难点塔筒法兰高强螺栓
解决方案1000N·m 倍增器,分段加载
结果出具检测报告;按标准核验示值误差与重复性。
03
工况计量质检
检测难点扭矩扳手周期校准
解决方案JJG 707,6 点线性
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

产品原理

从物理效应到测量结果,讲清设备的工作原理。

压头物镜试样光源数据处理
原理要点
  1. 扳手内部弹性元件(扭簧/扭杆)或应变式传感器感受扭矩并转换为机械指针位移或电信号
  2. 预置式达到设定扭矩时发出咔嗒声或打滑保护,数显式实时显示峰值/跟踪值并可存储上传
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

动图流程

标准作业顺序,并标出最易引入误差的关键步骤。

01设定目标扭矩 →
02装配并施加力矩 →
03达到设定值报警/打滑 →关键控制点
04记录紧固数据 →关键控制点
05定期送检或现场校验

参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

标准规范

涉及方法、检定与验收的国家标准与国际标准。

标准编号适用范围
GB/T 15729扭力扳手通用技术条件
JJG 707扭矩扳子检定规程
ISO 6789螺钉和螺纹紧固件装配工具 手动力矩工具
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

选型方案

按工况对应推荐系列,再与工程师确认具体配置。

工况推荐系列选型理由
按扭矩范围选工作点宜落在量程 20%–80%以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
大批量装配选数显式(可记录上传)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
防爆/无电源场合选预置式以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
实验室校准选扭矩检定仪(0.3 级)。精度等级±3%(工具级)、±1%(检定级)。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

检测方法

取样、制样、检测、复核与验收判据。

标准作业流程
    验收判据

    用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。

    注意事项

    班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。

    常见问题
    How do I choose the right configuration?
    Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
    Are the published specifications final?
    They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
    Do you support sample testing?
    Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
    咨询热线