RQ-DRYI-758真空数显度可控干燥箱技术参数
RQDZF-6000真空干燥箱技术参数
RQ-DRYI-756立式鼓风干燥箱—液晶显示技术参数
RQ-DRYI-755高温鼓风干燥箱技术参数
RQ-DRYI-754精密鼓风干燥箱技术参数
RQ-DRYI-753鼓风干燥箱技术参数
没有匹配的机型,换个关键词或直接联系工程师。
技术资料
六份技术文件,覆盖原理到验收
行业案例
典型检测工况,以及本产品线对应的解决思路。
01
工况电子
检测难点元件烘干除湿
解决方案105℃/2h,均匀度 ±2℃
结果出具检测报告;按标准核验示值误差与重复性。
02
工况医药
检测难点玻璃器皿灭菌
解决方案180℃/2h 干热
结果出具检测报告;按标准核验示值误差与重复性。
03
工况材料
检测难点含水率测定
解决方案恒重法,105℃
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
产品原理
从物理效应到测量结果,讲清设备的工作原理。
原理要点
- 电热元件加热,风机强制空气循环使箱内温度均匀
- 真空箱通过真空泵降低气压,使水分沸点下降,实现低温快速干燥并防止氧化
- PID 控制器按传感器反馈调节加热功率
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
动图流程
标准作业顺序,并标出最易引入误差的关键步骤。
01装样并关好箱门 →
02设定温度与时间 →
03升温恒温 →关键控制点
04到时取出/自然冷却 →关键控制点
05称量或测试
参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
标准规范
涉及方法、检定与验收的国家标准与国际标准。
| 标准编号 | 适用范围 |
|---|---|
GB/T 30435 | 电热干燥箱及电热鼓风干燥箱 |
— | JJF 1101 环境试验设备温度、湿度参数校准规范 |
GB/T 6284 | 化工产品中水分含量的测定 干燥减量法 |
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
选型方案
按工况对应推荐系列,再与工程师确认具体配置。
工况推荐系列选型理由
常规干燥选鼓风干燥箱(室温+10~300℃)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
易氧化、热敏材料选真空干燥箱以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
需精确控温选带程序控温与独立超温保护以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
按容积选 30/70/140/240L。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
检测方法
取样、制样、检测、复核与验收判据。
标准作业流程
- 按 JJF 1101 布 9 点测温,评价温度偏差、均匀度与波动度
- 真空箱还需检查真空保持能力(24h 压升)
验收判据
用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。
注意事项
班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.