RQJHY-RI在线折光仪技术参数
RQ-REFR-748宝石折射仪技术参数
RQ-REFR-747笔式糖度计技术参数
RQJH-PR手持折射仪技术参数
RQJH-PB手持糖度计技术参数
RQJH-DB数显糖度计技术参数
RQJH200全自动折光仪技术参数
RQJH300全自动折光仪技术参数
RQJH500全自动折光仪技术参数
RQJH600全自动折光仪技术参数
RQ2WAJ阿贝折射仪技术参数
没有匹配的机型,换个关键词或直接联系工程师。
技术资料
六份技术文件,覆盖原理到验收
行业案例
典型检测工况,以及本产品线对应的解决思路。
01
工况食品饮料
检测难点果汁可溶性固形物
解决方案0~95% Brix,±0.1
结果出具检测报告;按标准核验示值误差与重复性。
02
工况机械加工
检测难点切削液浓度
解决方案数字折射,0~50%
结果出具检测报告;按标准核验示值误差与重复性。
03
工况珠宝鉴定
检测难点宝石折射率
解决方案1.30~1.81,接触液法
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
产品原理
从物理效应到测量结果,讲清设备的工作原理。
原理要点
- 光线由光密介质射向光疏介质,当入射角大于临界角时发生全反射
- 临界角与两侧折射率满足 n₁·sinθc=n₂,测得临界角(明暗分界线位置)即可求得折射率,溶液浓度与折射率呈固定关系
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
动图流程
标准作业顺序,并标出最易引入误差的关键步骤。
01清洁棱镜并滴加样品 →
02合上盖板 →
03调焦观察明暗分界线 →关键控制点
04读数或按测量键 →关键控制点
05记录温度修正后的结果
参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
标准规范
涉及方法、检定与验收的国家标准与国际标准。
| 标准编号 | 适用范围 |
|---|---|
GB/T 614 | 化学试剂 折光率测定通用方法 |
GB/T 6488 | 液体化工产品 折光率的测定 |
JJG 895 | 阿贝折射仪检定规程 |
ISO 2173 | 果蔬制品 可溶性固形物测定(折光法) |
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
选型方案
按工况对应推荐系列,再与工程师确认具体配置。
工况推荐系列选型理由
实验室通用选阿贝折射仪(可测固体与薄膜)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
现场快速检测选便携数显折光仪以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
糖度专项选糖度计(带 Brix 与温度补偿)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
高精度选带恒温夹套与 CCD 自动读数的机型。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
检测方法
取样、制样、检测、复核与验收判据。
标准作业流程
- 用标准折射率液或标准玻璃块校验示值
- 测量前必须做温度修正(20℃ 基准),棱镜清洁与样品覆盖均匀性对结果影响明显
验收判据
用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。
注意事项
班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.