中国(上海)自由贸易试验区临港新片区老芦公路536号
021-57525860·13162862074
首页/产品目录/棱镜耦合仪
06 / 16 · 产品线

棱镜耦合仪Prism Couplers

棱镜耦合仪通过棱镜与薄膜间的消逝场耦合激发导模,由耦合角精确反演薄膜的折射率与厚度,是光学镀膜、集成光波导、平板显示行业的基准测量手段。

1款机型
0类型
GBISO · ASTM
48h技术响应
1 款机型
共 1 款机型 · 产品线⚡ 快速选型向导⌕ 产品选型中心¥ 报价申请与选型方案▤ 选型方案↓ 选型方案书
没有匹配的机型,换个关键词或直接联系工程师。

技术资料

六份技术文件,覆盖原理到验收

行业案例

典型检测工况,以及本产品线对应的解决思路。

01
工况光通信
检测难点薄膜折射率
解决方案632.8nm,精度 ±0.0005
结果出具检测报告;按标准核验示值误差与重复性。
02
工况光学镀膜
检测难点膜厚与折射率
解决方案波导模式同步反演
结果出具检测报告;按标准核验示值误差与重复性。
03
工况高校科研
检测难点液晶各向异性
解决方案寻常/非寻常光折射率
结果出具检测报告;按标准核验示值误差与重复性。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

产品原理

从物理效应到测量结果,讲清设备的工作原理。

压头物镜试样光源数据处理
原理要点
  1. 激光经棱镜耦合进入薄膜,当入射角满足模式方程时激发导模,反射光出现暗线(m-line)
  2. 测出各模式的耦合角,联立模式方程即可同时解出膜厚与折射率
  3. TE/TM 模式分别对应面内与面外折射率
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

动图流程

标准作业顺序,并标出最易引入误差的关键步骤。

01清洁棱镜与样品并压紧 →
02选择激光波长 →
03角度扫描寻找暗线 →关键控制点
04记录各模式耦合角 →关键控制点
05软件拟合折射率与厚度

参考耗时 — 单件典型耗时 3–15 分钟;高亮步骤是测量误差的主要来源。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

标准规范

涉及方法、检定与验收的国家标准与国际标准。

标准编号适用范围
GB/T 26332光学薄膜 术语与通用要求
GB/T 2831光学零件的面形偏差
ISO 10110光学与光子学 图纸制备
常见问题
Which standards apply?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

选型方案

按工况对应推荐系列,再与工程师确认具体配置。

工况推荐系列选型理由
单层膜常规测量选单波长(632.8nm)机型以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
多层膜与色散分析选多波长以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
波导器件选带 TE/TM 偏振控制与自动角度扫描的机型以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
超薄膜(以上参数仅供参考,最终配置、价格与交期以正式报价单为准。
常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.

检测方法

取样、制样、检测、复核与验收判据。

标准作业流程
  1. 用已知折射率的标准玻璃块(如 SF10、BK7)校验角度系统
  2. 同一片样品多点测量取平均,厚度不均匀度按极差评价
验收判据

用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。

注意事项

班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。

常见问题
How do I choose the right configuration?
Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.
Are the published specifications final?
They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.
Do you support sample testing?
Yes. Send samples for measurement; we provide a test report together with the recommended configuration.
咨询热线