点击查看大图RQXQ-2B
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
XQ-2B型金相试样镶嵌机(以下简称镶嵌机)适用于对不是整形、不易手拿的微小金相试样进行热固性塑料压制.成形后可方便地进行试样磨抛操作,也有利于在金相显微镜下进行显微组织测定.本机系机械式镶嵌机,旋转机体外手轮,通过一对锥齿轮带动机体内丝杆使压制试样的下模在钢模套内上下移动,热固性塑料连同镶嵌的试样在加热条件下成形.试样制备过程中的成形压力由固定在机体内的弹簧自动补偿,试样压制的压力可由信号灯给以指示.本机配有智能型数字显示温控器,设定时间,和蜂鸣报警,温度传感器采用热电偶.本机具有高灵敏度、高精度,有温度显示,易观察又易操作等优点.
产品特点
技术参数
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点用金刚石或氧化铝切割片低速取样以减少热影响与变形热镶/冷镶固定试样由粗到细逐级磨抛,逐级消除上一道工序的划痕经化学或电解腐蚀显示晶界与相组成,再在显微镜下判读常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
技术规格
| 型号 | RQXQ-2B |
|---|---|
| 机体 | 台式 |
| 镶嵌室 | 单镶嵌室 |
| 镶嵌方式 | 手动 |
| 加卸压方式 | 手动 |
| 温度控制 | 自动 |
| 试样升降 | 手动 |
| 制冷方式 | 自然冷却 |
| 制样结束 | 蜂鸣音提示 |
| 试样压制规格 | 可选 Φ25mm,Φ30mm,Φ40mm |
| 加热器规格 | Φ25/Φ30mm:650W;Φ40mm:800W |
| 温度调节范围 | 室温 -300℃ |
| 定时控制 | 0-99 分钟 |
| 电源 | 220V |
| 外型尺寸 | 320 * 280 * 420mm(长 * 宽 * 高) |
| 净重 | 22KG |
| 毛重 | 32kg |
| 基本配置 | |
| 主机 | 一台 |
| 镶嵌模具 | 一套 |
| 镶嵌料 | 一桶(500mL) |
| 电源线 | 一根 |
| 技术文件 | 一份(说明书、保修卡、合格证) |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由大工件(≥Φ100mm)选大切割台(如 900×450mm)立式切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。薄片、脆性件选低速精密切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。批量制样选自动磨抛机(单盘/双盘/三盘)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需保边选真空镶嵌以上参数仅供参考,最终配置、价格与交期以正式报价单为准。日常耗材按材料硬度匹配金刚石粒度。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程制样质量按 GB/T 13298 评定:观察面平整、无划痕、无拖尾、无彗星尾、边缘不塌陷,组织真实无变形层必要时用同材质标准样对比验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
常见问题
RQXQ-2B 的报价与交期是多久?
RQXQ-2B 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。