点击查看大图RQTH190
适用于TH190里氏硬度计试金属材料的硬度,具有测试精度高、体积小、操作容易、携带方便,测量范围宽的特点,它是以里氏硬度为原理,测出里氏(HL)硬度值经过程序自动转换成布氏,肖氏等硬度值,还可以配置各种测试配件,来满足于各种测试条件和环境…
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
TH190里氏硬度计产品特点
- 可实现七种硬度制(HL、HRC、HRB、HRA、HB、HV、HS)之间的相互转换
- 开机电压显示和欠压提示,有欠压自动关机功能
- 具有示值软校准功能
- 段码液晶显示
- 铝合金外壳,小巧精致
- 可存储99个测量平均值,有自动存储开/关
- 可充电锂电池,可用USB口进行充电
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点在规定试验力下将压头压入试样表面,保持规定时间后卸载,测量压痕对角线(维氏/显微维氏)、压痕直径(布氏)或压入深度(洛氏),按标准公式换算硬度值维氏硬度 HV=0.1891·F/d²,布氏 HBW=0.102·2F/(πD(D−√(D²−d²)))计算关系: HV=0.1891·F/d²,布氏 HBW=0.102·2F/(πD(D−√(D²−d²)))常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
技术规格
| 测量范围 | 见表一 |
|---|---|
| 示值误差和示值重复性 | 见表二 |
| 冲击装置 | D型冲击装置 |
| 测量方向 | 任意 |
| 上下限设置范围 | (170~960)HLD |
| 电源 | 充电锂电池 |
| 工作温度 | 0~40℃ |
| 通讯接口标准 | RS232 |
| 外型尺寸 | 54mm×43mm×26mm |
| 重量 | 约150g |
| 标准配置 | 主机(含冲击装置)、标准里氏硬度块、尼龙刷 |
| 可选附件 | 异型支撑环(见表4) |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由薄片、渗层、小件选显微维氏以上参数仅供参考,最终配置、价格与交期以正式报价单为准。热处理件按硬化层深度选维氏或洛氏(HRA/HRC)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。粗晶粒铸锻件选布氏以上参数仅供参考,最终配置、价格与交期以正式报价单为准。大型工件现场检测选里氏或超声以上参数仅供参考,最终配置、价格与交期以正式报价单为准。橡胶塑料选邵氏。批量检测优先选带自动载物台与图像测量的维氏硬度测量分析系统。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程用标准硬度块间接检定:在标准块工作面上均布不少于 5 点,示值误差与重复性满足 JJG 规程日常用标准块做班前校验,压痕测量系统需定期用标准刻线尺校准验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
常见问题
RQTH190 的报价与交期是多久?
RQTH190 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。