点击查看大图RQP-403J
本仪器可广泛用于机械工业的金相组织观察分析,地矿部门对矿物的分析研究,电子等方面的观察测量,是工厂、高等院校、科研机构及电子工业的首先.。
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
本仪器可广泛用于机械工业的金相组织观察分析,地矿部门对矿物的分析研究,电子等方面的观察测量,是工厂、高等院校、科研机构及电子工业的首先。稳定、高品质的光学系统使成像更清晰,衬度更好,简洁而新颖的外观更符合现代潮流,人性化的设计,简便的操作使您从繁重的工作压力中解放出来。
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点物镜与目镜两级放大,倒置式机型将物镜置于载物台下方,适合未经镶嵌的块状试样数值孔径决定分辨率(d=0.61λ/NA)配合柯拉照明获得均匀视场与真实反差常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
技术规格
| 技术规格 | 型号 | |||||
|---|---|---|---|---|---|---|
| RQP-403J | RQP-403JT | RQP-403JA | RQP-403JAT | |||
| 观察头 | 45 度铰链式双目头 ( 50mm -75mm ) | ● | ● | |||
| 45 度铰链式三目头 ( 50mm -75mm ) | ● | ● | ||||
| 目镜 | WF10X /20mm | ● | ● | |||
| WF10X /22mm | ● | ● | ||||
| WF10X / 20mm 带十字分划板及0.1mm 刻尺 | ● | ● | ● | ● | ||
| 转换器 | 四孔转换器 | ● | ● | |||
| 五孔转换器 | ● | ● | ||||
| 物镜 | 195 金相物镜 | 4 X /0.1W.D .25mm | ● | ● | ||
| 10 X /0.25W.D .11mm | ||||||
| 20 X /0.4W.D .9mm | ||||||
| 40 X /0.6W.D. 3.8mm | ||||||
| 无限远金相物镜 | 4 X /0.1W.D .25mm | ● | ● | |||
| 10 X / 0.25W.D .12mm | ||||||
| 20 X / 0.4W.D .10mm | ||||||
| 40 X / 0.6W.D. 7.1mm | ||||||
| 50 X /0.75W.D. 1.9mm 80 X (S) /0.9W.D. 0.9mm | ○ | ○ | ○ | ○ | ||
| 平台 | 双层移动平台 | ● | ● | ● | ● | |
| 平台尺寸 : 242mm × 172mm | ||||||
| 中心载物台:Φ110mm | ||||||
| 移动范围 : 75mm × 50mm | ||||||
| 调焦 | 粗、微动同轴调焦,采用齿轮变速箱调焦机构,微动格值0.002mm | ● | ● | ● | ● | |
| 照明 | 落射柯勒照明,带孔径可变光栏和视场可变光栏 12V/30W.AC85V-230V 光源可调节 | ● | ● | ● | ● | |
| 偏光装置 | 检偏镜可 360 度转动,起偏镜检偏镜均可移出光路 | ● | ● | ● | ● | |
| 滤色片 | 蓝色、绿色、黄色 | ● | ● | ● | ● | |
| 检测工具 | 0.01mm 测微尺 | ● | ● | ● | ● | |
| 可供附件 | 130 万、200万、300 万、500万像素 CMOS电子目镜 | |||||
| 摄影装置 | ||||||
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由常规金相选三目倒置(可接相机)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需评级出报告选配图像分析软件与专业物镜(平场消色差)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。现场大件选便携式或体视以上参数仅供参考,最终配置、价格与交期以正式报价单为准。透明薄膜、纤维选偏光以上参数仅供参考,最终配置、价格与交期以正式报价单为准。尺寸测量选工具显微镜。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程放大倍数用标准测微尺校准,分辨率用分辨率板验证,视场均匀性用毛玻璃目视检查图像分析系统的长度测量需用标准刻线尺标定像素当量验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQ4XCRQAMM-8RQBJ-XRQ4XI获取报价 →参数对比 →咨询工程师 →
常见问题
RQP-403J 的报价与交期是多久?
RQP-403J 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。