点击查看大图RQMY-2A
MY-2A双盘砂带磨样机,本机器采用彩色触摸屏及PLC控制系统,上部不锈钢壳体,配备自动循环冷却系统(主机下配有一个水箱及循环水泵,在磨样过程中,把污物带下水中,使工作不会有污物在空气中,可任意选择干湿磨…
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
MY-2A双盘砂带磨样机,本机器采用彩色触摸屏及PLC控制系统,上部不锈钢壳体,配备自动循环冷却系统(主机下配有一个水箱及循环水泵,在磨样过程中,把污物带下水中,使工作不会有污物在空气中。),可任意选择干湿磨;砂带左右位置可调整(工作中可通过砂带调节机构随时调整砂带左右位置),以达到更好的为光谱试样、金相试样等各种样块的预磨处理。
产品特点
MY-2A双盘砂带磨样机是经多方的市场调研和采集多方面使用情况、汇集各家之长而研制开发的新产品。
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点用金刚石或氧化铝切割片低速取样以减少热影响与变形热镶/冷镶固定试样由粗到细逐级磨抛,逐级消除上一道工序的划痕经化学或电解腐蚀显示晶界与相组成,再在显微镜下判读常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
技术规格
| 序号 | 型号 | MY-2A |
|---|---|---|
| 1 | 机体形式 | 立地一体式 |
| 2 | 控制系统 | 彩色触摸屏、PLC |
| 3 | 磨样时间 | 1-999分钟任意设定 |
| 4 | 磨样时长追踪 | 触摸屏直接显示 |
| 5 | 研磨室外壳 | 不锈钢 (双磨室) |
| 6 | 研磨方式 | 干磨、湿磨任意选择 |
| 7 | 磨样窗尺寸 | (140X120mm )X2 |
| 8 | 砂带规格 | 100X(915-920)mm |
| 9 | 主轴转速 | 100-1500转/分 (无极调速) |
| 10 | 砂带移动 | 0-750米/分钟(无极调速) |
| 11 | 电机功率 | 1.1KW/220V |
| 12 | 冷却系统 | 自动循环冷却 |
| 13 | 调节机构 | 砂带横向位置随时可调 |
| 14 | 外形尺寸 | 800×700×1000mm |
| 15 | 整机重量 | 150KG |
| 标准配置: | ||
| 1 | 主机 | 一台 |
| 2 | 冷却系统 | 一套(自动循环冷却系统) |
| 3 | 磨样砂带 | 两条 |
| 4 | 技术文件 | 说明书一份、保修卡一份、合格证一份 |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由大工件(≥Φ100mm)选大切割台(如 900×450mm)立式切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。薄片、脆性件选低速精密切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。批量制样选自动磨抛机(单盘/双盘/三盘)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需保边选真空镶嵌以上参数仅供参考,最终配置、价格与交期以正式报价单为准。日常耗材按材料硬度匹配金刚石粒度。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程制样质量按 GB/T 13298 评定:观察面平整、无划痕、无拖尾、无彗星尾、边缘不塌陷,组织真实无变形层必要时用同材质标准样对比验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
常见问题
RQMY-2A 的报价与交期是多久?
RQMY-2A 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。