点击查看大图RQHBRVS-187.5
RQHBRVS-187.5电动布洛维硬度计适用淬火、表面淬火钢,硬质合金钢,有色金属,各种调质及退火钢,硬化薄钢板,也适合较软的金属,表面热处理和化学热处理等.用HBW表示,维氏硬度计:主要是用于测黑色金属、有色金属、硬质合金(如铝合金)及表面渗碳…
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
布洛维硬度计具备布氏,洛氏,维氏三种试验方法,七级试验力的多功能硬度机,能满足用户多种硬度测试的要求.试验力的施加、保荷和卸荷自动完成.使用方便,受到广大用户的喜爱.
一、MC010系列布洛维硬度计适用范围:
淬火、表面淬火钢,硬质合金钢,铸铁,有色金属,各种调质及退火钢,硬化薄钢板,也适合较软的金属,表面热处理和化学热处理等.
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点在规定试验力下将压头压入试样表面,保持规定时间后卸载,测量压痕对角线(维氏/显微维氏)、压痕直径(布氏)或压入深度(洛氏),按标准公式换算硬度值维氏硬度 HV=0.1891·F/d²,布氏 HBW=0.102·2F/(πD(D−√(D²−d²)))计算关系: HV=0.1891·F/d²,布氏 HBW=0.102·2F/(πD(D−√(D²−d²)))常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
技术规格
| 型号 | HBRVS-187.5 |
|---|---|
| 操作方式 | 触摸屏 |
| 洛氏硬度标尺 | HRA、HRB、HRC、HRD、HRE、HRF、HRG、HRH、HRK、HRL、HRM、HRR、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T; |
| 布氏硬度标尺 | HBW2.5/15.625、HBW2.5/31.25、HBW2.5/62.5、HBW5/125、HBW2.5/187.5; |
| 维氏硬度标尺 | HV5、HV10、HV20、HV30、HV50、HV100 |
| 洛氏试验力 | 60Kg、100Kg、150Kg; |
| 表面洛氏试验力 | 15Kg、30Kg、45Kg; |
| 布氏试验力 | 15.625Kg、31.25Kg、62.5Kg、125Kg、187.5Kg; |
| 维氏试验力 | 5Kg、10Kg、20Kg、30Kg、50Kg、100Kg |
| 洛氏硬度测试范围 | HRA:20-88、HRB:20-100、HRC:20-70; |
| 表面洛氏硬度测试范围 | HR15N: 70-94、HR30N:42-86、HR45N:20-77、HR15T: 67-93、HR30T: 29-82 、HR45T: 10-72; |
| 布氏硬度测试范围 | HBW:8HBW-650HBW; |
| 维氏硬度测试范围 | HV:8HV-3000HV; |
| 执行国家标准 | GB/T230.1 国家标准,GB/T 230.2 国家标准,GB/T231.1 国家标准,GB/T231.2 国家标准,GB/T4340.1 国家标准, GB/T3440.2 国家标准,JJG112 检定规程 |
| 试验力保荷时间 | 机器设定 0-60 秒,最小变动量 1 秒 |
| 计算方式 | 自动计算 |
| 放大倍率 | 25X、50X、100X |
| 压头中心距离 | 160mm |
| 测试洛氏硬度试件最大高度 | 190mm |
| 测试布氏、维氏硬度试件最大高度 | 170mm |
| 数据输出 | 内置微型打印机 |
| 电源电压 | AC 220V/50Hz |
| 外形尺寸 | 340540770mm(长宽高) |
| 净重 | 88.0kg |
| 毛重 | 105.0kg |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由薄片、渗层、小件选显微维氏以上参数仅供参考,最终配置、价格与交期以正式报价单为准。热处理件按硬化层深度选维氏或洛氏(HRA/HRC)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。粗晶粒铸锻件选布氏以上参数仅供参考,最终配置、价格与交期以正式报价单为准。大型工件现场检测选里氏或超声以上参数仅供参考,最终配置、价格与交期以正式报价单为准。橡胶塑料选邵氏。批量检测优先选带自动载物台与图像测量的维氏硬度测量分析系统。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程用标准硬度块间接检定:在标准块工作面上均布不少于 5 点,示值误差与重复性满足 JJG 规程日常用标准块做班前校验,压痕测量系统需定期用标准刻线尺校准验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQHBRVS-187.5RQHR-150ARQHR-150BRQHR-150DT获取报价 →参数对比 →咨询工程师 →
常见问题
RQHBRVS-187.5 的报价与交期是多久?
RQHBRVS-187.5 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。