点击查看大图RQGX-40
一款基于金相样品光固化镶嵌的现代产品,样品被放置在配有定制的强大LED技术的机器中,并在UV(紫外线) 透明镶嵌模具中填充了UV固化树脂,透明的样品可以在很短的时间范围内制作完成,提供了冷却装置可以使得样品快速固化冷却从而提高了工作效率和安全性。
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
一款基于金相样品光固化镶嵌的现代产品,样品被放置在配有定制的强大LED技术的机器中,并在UV(紫外线) 透明镶嵌模具中填充了UV固化树脂,透明的样品可以在很短的时间范围内制作完成,提供了冷却装置可以使得样品快速固化冷却从而提高了工作效率和安全性。
产品特点
技术参数
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点用金刚石或氧化铝切割片低速取样以减少热影响与变形热镶/冷镶固定试样由粗到细逐级磨抛,逐级消除上一道工序的划痕经化学或电解腐蚀显示晶界与相组成,再在显微镜下判读常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
技术规格
| 型号 | RQGX-40 |
|---|---|
| 机体 | 台式 |
| 镶嵌方式 | 光固化 |
| 控制系统 | 彩色触摸屏、PLC 控制 |
| 功率 | 低档 / 中档 / 高档 |
| 时间 | 自由调整 |
| 冷却方式 | 自动 |
| 制样结束 | 自动出仓 |
| 最多制作样品数量 | Φ30mm 模具:24 个 ,Φ40mm 模具:15 个 |
| 最大样品高度 | 40mm |
| LED 波长 | 365nm |
| 固化时间 | 60 秒 ( 配合使用 M789001 光固化剂为例 ) |
| 固化温度 | 70-90 ° C( 配合使用 M789001 光固化剂为例 ) |
| 控制电源 | AC100-240 V ,50/60 Hz |
| 机器尺寸 | 420*410*200mm(长 * 宽 * 高) |
| 机器重量 | 16KG |
| 基本配置 | |
| 主机 | 一台 |
| UV 光源系统 | 一套 |
| 镶嵌模具 | 白色硅胶软模 Φ30 mm、Φ40 mm 各 3 个 |
| 镶嵌料 | UV 光固化树脂 250 ml |
| 工具 | 不锈钢镊子、量杯、漏斗各 1 |
| 电源线 | 一根 |
| 技术文件 | 一份(说明书、保修卡、合格证) |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由大工件(≥Φ100mm)选大切割台(如 900×450mm)立式切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。薄片、脆性件选低速精密切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。批量制样选自动磨抛机(单盘/双盘/三盘)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需保边选真空镶嵌以上参数仅供参考,最终配置、价格与交期以正式报价单为准。日常耗材按材料硬度匹配金刚石粒度。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程制样质量按 GB/T 13298 评定:观察面平整、无划痕、无拖尾、无彗星尾、边缘不塌陷,组织真实无变形层必要时用同材质标准样对比验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
常见问题
RQGX-40 的报价与交期是多久?
RQGX-40 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。