点击查看大图RQAXQ-100
AXQ-100原ZXQ-100型 智能型全自动水冷镶嵌机是为满足批量、快速、精密制样而设计的立地一体式全自动金相镶嵌机。
- ✓原厂校准证书
- ✓12 个月质保
- ✓全国安装调试
- ✓支持非标定制
产品介绍
AXQ-100原ZXQ-100型 智能型全自动水冷镶嵌机是为满足批量、快速、精密制样而设计的立地一体式全自动金相镶嵌机。
产品特点
隔离式双镶嵌室可单独控制,也可同时制样;适用于所有材料(热固性和热塑性)的热镶嵌;程控式智能操作(温度、时间、冷却等)并可根据实际情况更换钢模套(Φ25mm/Φ30mm/Φ40mm/Φ45mm)选择合适的制样规格。
一、AXQ-100智能型全自动水冷镶嵌机技术参数:
从物理效应到测量结果,讲清设备的工作原理。压头物镜试样光源数据处理原理要点用金刚石或氧化铝切割片低速取样以减少热影响与变形热镶/冷镶固定试样由粗到细逐级磨抛,逐级消除上一道工序的划痕经化学或电解腐蚀显示晶界与相组成,再在显微镜下判读常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard; an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement; we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
技术规格
| 序号 | 型号 | AXQ-100 |
|---|---|---|
| 1 | 试样规格 | (Φ25mm/Φ30mm/Φ40mm/Φ45mm)可更换钢模套 |
| 2 | 机体 | 立地一体式 |
| 3 | 镶嵌室 | 隔离式双制样室(可单独控制) |
| 4 | 镶嵌方式 | 自动 |
| 5 | 加卸压方式 | 自动 |
| 6 | 温度控制 | 自动 |
| 7 | 试样升降 | 自动 |
| 8 | 制冷方式 | 自动 (循环水冷) |
| 9 | 加热器规格 | 1000Wx2 |
| 10 | 温度范围 | 0-300℃ |
| 11 | 压力范围 | 0-2MPA(制样压强0-72MPA) |
| 12 | 加温时间 | 0-99分(可调) |
| 13 | 水箱容量 | 60L |
| 14 | 控制电源 | 220V |
| 15 | 外形尺寸 | 700X560X1250mm |
| 16 | 重量 | 105KG |
| 17 | 机体 | 立地一体式 |
以上为标准配置参数。特殊量程、精度、夹具或软件接口可按工件定制,工程师 1 个工作日内给出配置清单与报价。
选型指南
- 按工况对应推荐系列,再与工程师确认具体配置。工况推荐系列选型理由大工件(≥Φ100mm)选大切割台(如 900×450mm)立式切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。薄片、脆性件选低速精密切割机以上参数仅供参考,最终配置、价格与交期以正式报价单为准。批量制样选自动磨抛机(单盘/双盘/三盘)以上参数仅供参考,最终配置、价格与交期以正式报价单为准。需保边选真空镶嵌以上参数仅供参考,最终配置、价格与交期以正式报价单为准。日常耗材按材料硬度匹配金刚石粒度。以上参数仅供参考,最终配置、价格与交期以正式报价单为准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
检测与验收
- 取样、制样、检测、复核与验收判据。标准作业流程制样质量按 GB/T 13298 评定:观察面平整、无划痕、无拖尾、无彗星尾、边缘不塌陷,组织真实无变形层必要时用同材质标准样对比验收判据用标准块间接检定:工作面均布不少于 5 点,示值误差与重复性需满足相应检定规程。注意事项班前用标准块校验,保持压头与试样表面清洁,测量系统定期用标准刻线尺校准。常见问题How do I choose the right configuration?Send us the specimen material, dimensions and applicable standard
- an engineer will propose the model and fixturing, and provide a written selection proposal.Are the published specifications final?They are reference values for the standard configuration. Final configuration, price and lead time are stated in the formal quotation.Do you support sample testing?Yes. Send samples for measurement
- we provide a test report together with the recommended configuration.相关机型RQZQ-600ZRQZQ-300FRQZQ-150FRQZQ-200获取报价 →参数对比 →咨询工程师 →
常见问题
RQAXQ-100 的报价与交期是多久?
RQAXQ-100 可以先寄样实测吗?
出厂随机附带哪些资料?
能否按工件定制夹具或扩展量程?
售后响应与培训如何安排?
交付与服务
- 主机一台(全新原装)
- 标准附件与工具组
- 说明书、合格证、装箱单
- 出厂校准证书
- 标准出口木箱包装
- 全国物流 3–7 天送达
- 工程师上门安装调试
- 现场操作与保养培训
- 整机质保 12 个月
- 故障 48 小时内响应
- 每年一次免费巡检
- CNAS 第三方校准代办
把工件与检测要求发给我们
工程师 1 个工作日内回复选型方案、配置清单与报价。